Category : Parking management system

The two-tone light boxes have 100 mm diameter LED lights in red and green.

Ideal for use in car parks, alternate access, parking ramps and industrial signals.

Features :

• 45 LEDs per light section provide excellent brightness
• Durable PC enclosure for indoor/outdoor applications
• Multi-layer moisture and dust-tight seal protects lenses from the elements
• IP65 approved waterproof housing
• Up to 90% energy savings compared to incandescent bulbs
• More than 500,000 hours of use
• Two right angle mounting brackets included
• Power supply: 85V to 265V AC

The two-tone light boxes have 200 mm diameter LED lights in red and green.

Ideal for use in car parks, alternate access, parking ramps and industrial signals.

Features :

1. 90 LEDs per light section provide excellent brightness
2. Durable PC enclosure for indoor/outdoor applications
3. Multi-layer moisture and dust-tight seal protects lenses from the elements
4. IP65 approved waterproof housing
5. Up to 90% energy savings compared to incandescent bulbs
6. More than 500,000 hours of use
7. Two right angle mounting brackets included
8. Power supply: 110V to 260V AC
9. Removable visors

The Red Cross and Green Arrow Lane Assignment Traffic Light is designed to clearly indicate the availability of traffic lanes. The red cross indicates a closed lane, while the green arrow indicates an open lane, allowing for smooth and safe traffic management.

The DP132 (230V AC) – DP134 (12V-24V DC) are microprocessor-based single-channel loop detectors specifically designed for parking and counting and access control applications.

Its main functions are to detect the presence of the vehicle by means of a change in inductance caused by the passage of the vehicle over an inductive loop buried under the road surface.

The DP132 and DP134 incorporate an automatic sensitivity amplification option that ensures trouble-free installation and improved sensitivity to facilitate reliable detection of high-body vehicles and SUVs.

The strong points of the DP132 – DP134 inductive loop detector:

1. Automatic sensitivity amplification

The automatic sensitivity amplification function allows the loop detector to automatically select the best operating sensitivity which will achieve better detection regardless of the vehicle type.

1. Isolation protection

The loop isolation transformer provides protection against lightning and transient damage.

1. Selectable permanent presence

The presence relay output will be kept activated during detection, configurable as 'normally open' or 'normally closed'.

This function prevents premature re-closing of the barrier or gate when the vehicle is still on the detection loops.

1. Filtered

It can be activated to delay detection and avoid the detection of small objects (trolleys, safety shoes, etc.) passing over the loop.

1. Areas of application

Single-channel detectors can be used in various parking and motorized obstacle applications:

- Safe for retractable barriers and bollards.

- Manage free exits from the parking lot at barriers and gates.

- Provide vehicle presence information at access control or toll booths.

- Provide the impulses necessary for vehicle counting.

- For use with parking ramp management systems.

The DP272 (230V AC) and DP274 (12V – 24V AC) are microprocessor-based dual-channel detectors specifically designed for parking and counting and access control applications.

Their main function is to detect the presence of the vehicle by means of a change in inductance caused by the passage of the vehicle over an inductive loop buried under the road surface.

The DP272 and DP274 incorporate a unique automatic frequency selection option that ensures trouble-free installation and improved sensitivity to facilitate reliable detection of high-body vehicles and SUVs.

The strong points of the DP272 – DP274 inductive loop detector:

• Automatic frequency

The AFS (Automatic Frequency Selection) feature allows the loop detector to automatically select the best operating frequency that will result in the lowest loop noise and maximum signal strength.

• Diagnostic capacity

The optional DT-DU700 Bluetooth module allows you to retrieve all the information needed to establish a complete diagnosis via an application on a tablet or smartphone.

The DU Diagnostics app is available for free on the App Store and Google Play.

• Sensitivity

Several sensitivity levels are possible, making these detectors the most sensitive.

Detection of unwanted small objects such as bicycles and trolleys can be eliminated by selecting lower sensitivity levels.

Low axle vehicles and vehicle/trailer combinations will not lose detection.

• Power failure memory

Infinite retention of loop detector state memory in case of power failure. This feature can be enabled and disabled via the 'Reset' push button.

• Isolation protection

The loop isolation transformer provides protection against lightning and transient damage.

• Presence or pulse output

One relay output per channel configurable as presence or pulse, 'normally open' or 'normally closed'.

• Direction of passage with DP272 and DP274 loop detectors

This option allows you to indicate the direction of passage of the vehicle. Very practical for counting applications.

The variable message LED panel is designed to be installed in public environments such as car parks, shopping centres and urban spaces.

The LED panel visible from 50 m displays the number of free spaces provided by the counting system or a personalized message controlled by a contact (free/Full or Fire message).

Advantages of the panel

The LED Variable Message Panel is mainly used for counting the number of free spaces in car parks to guide users.

1. High visibility LEDs up to 50 m
2. Display in green, red or orange
3. Rugged and waterproof for outdoor use
4. Optional wall or mast mounting
5. Auto-scroll function
6. Free / Full Function
7. Configurable brightness and personalized messages
8. OEM version for integration into custom enclosures

Parking counting

The Variable Message Panel is used to indicate the number of free spaces available in car parks.

FREE/FULL function

Two messages can be recorded which will be controlled by an external contact.

FREE mode in green and FULL mode in RED is typical usage.

Messages are configurable with software through the RS485 bus.

In monochrome or trichrome version, wall-mounted or flag-mounted, this signal box meets most signaling needs in enclosed car parks.

The boxes are made of aluminum profiles, a material that is extremely weather-resistant and completely recyclable.

Mechanical characteristics

Standard natural anodized aluminum housing

Dimensions: 1100 x 350 x 122 mm

IP54 / IK08 protection

Several fixing methods depending on options

Optoelectronic characteristics

As standard, texts “FREE” / “FULL” / “CLOSED”, other combinations on request

Reading distance 50m

Adjustable brightness

The multi-line LED panel is a dynamic display device designed for clear and visible communication from a distance.

Mechanical characteristics

1. Natural anodized aluminum casing as standard
2. Dimensions: 850 x 1000 x 122 mm
3. Choice of decorations made from high-quality, mass-dyed vinyl
4. IP54 / IK08 protection
5. Fixing on 89mm mast by two aluminum flanges

Optoelectronic characteristics

1. Up to 6 variable message displays with 75mm character height
2. Capacity of 8 characters per line
3. 30m reading distance
4. 5 display colors: red, green, blue, white, yellow
5. Fixed brightness setting from a monitoring application

The Multi-Line Totem is a large dynamic display, ideal for outdoor spaces thanks to its robustness and its anodized or powder-coated aluminum structure.

Mechanical characteristics

1. Natural anodized aluminum casing or RAL thermo-lacquered
2. Dimensions: h max 3000 x width 650 to 1000 depending on format x Thickness 122 or 150 mm
3. Choice of decorations made from high-quality, mass-dyed vinyl
4. IP54 / IK08 protection
5. Sole cover base made of 3mm aluminum, removable for fixing and connection operations.

Optoelectronic characteristics

1. New generation high definition variable message display, 95mm character height
2. Capacity of 8 characters per line in wide font and 11 characters in narrow font.
3. Display functions: free spaces, fixed text, flashing, alternating, scrolling, time and date
4. Automatic brightness adjustment

The detection of a vehicle by a detector is generally done by means of an inductive loop embedded in the roadway.

If it is not possible to groove the floor (e.g.: waterproofing), the recessed loop can be replaced by a detection pad fixed to the surface (for light vehicles only).

In order for a loop to be effective and to match the vehicle detector to which it is connected, it must be made taking into account the value of certain parameters, namely:

1. type of cable used,
2. perimeter of the loop,
3. number of turns constituting it,
4. loop/detector distance (feeder).

Technical characteristics:

1. The loop:

The loop consists of a single-stranded, multi-stranded copper cable insulated with

section of at least 1.5 mm². Its perimeter is between 3 and 20 m. For a conventional track, a perimeter of 5 to 6 m is recommended. The loop must be rectangular, with the longest side perpendicular to the direction of travel. The recommended height is 1 m. Typically, the width of the loop is equal to the width of the track, subtracting 300 mm from each side. When the track width is very large, it is preferable to connect two loops rather than one large one in order to obtain optimum sensitivity. The space between the two loops is at least 1 m.

1. The feeder:

The feeder is the connecting cable between the loop and the detector. It is made of the same cable as the loop, but twisted at a rate of 20 turns per meter. Ideally, the length of the feeder should not exceed 15 m. However, it is possible to go up to a distance of 100 m maximum. However, the sensitivity of the loop gradually decreases with the increase in the length of the feeder. In this case, it is necessary to compensate for this loss by adding a turn or two to the loop. When the feeder is very long or when it runs with other low-voltage conductors, it is recommended to use a cable with a screen. The screen is earthed on the detector side.

FACILITY:

The loop is inserted into a groove 10 to 15 mm wide and 30 to 40 mm deep. The corners of this groove are broken to avoid damage to the cables. An additional groove is made from a corner of the loop to the side of the track to route the feeder to the detector. The grooves will then be filled with rapid cement, black epoxy resin or bitumen mastic.

Static metal masses do not interfere with the operation of the detector, but they reduce its sensitivity. It is then possible to compensate for this loss by adding one or two turns to the loop.

The detection pad, to be fixed to the surface, consists of an electromagnetic loop molded in a protective synthetic rubber casing.

It is fixed directly to the ground and adapts to its shape regardless of any possible deformations.

Its ease of installation by cold gluing avoids grooving the floor, so no sawing work and re-closing of the grooves.

Application:

1. The detection pad is used in applications where it is difficult or even impossible to make grooves for traditional detection loops:
2. Vehicle counting
3. Access management (residence, parking, etc.)
4. Passage management in narrow ramps etc.

Technical characteristics:

1. Materials: composite
2. Non-slip: raised pads on the entire surface of the pad
3. Pedestal dimensions: 600 x 600 mm
4. Internal coil dimensions: 450 x 450 mm (4 turns)
5. Loop tail dimension: 5 m
6. Weight: 3.4 kg
7. Fixing: by cold gluing (contact us)
8. Operating temperature: ‐10 to +100°C,
9. Maximum humidity level: 100%
10. Protection index: IP67

Scan&Go Basic is an entry-level offering to prevent unwanted users from entering car parks and small and medium-sized buildings.

1. Use of 2D code tickets and cards for temporary users
2. No wiring between equipment
3. Quick installation and commissioning

What does Scan&Go Basic mean?

Scan&Go Basic is a plug & play, stand-alone access control product, developed to eliminate the problem of unwanted vehicles and pedestrians, whilst enabling controlled access for visitors, customers, suppliers and staff in a more user-friendly and cost-effective way.

A system that does not require a wired or wireless network, a computer or software to be operational. Electric current is sufficient. Installation and commissioning are therefore done in record time and reliability is unmatched.

Operating principle

A 2D code ticket is generated by an operator with a printer that has pre-programmed buttons defining the validity of the tickets.

The scanner is mounted in a robust aluminum housing. It autonomously interprets the validity included in the 2D code on the ticket and then decides whether or not to grant access.

At the exit, another scanner also interprets the ticket to authorize the exit.

Advantages of the system

1. Ticket with validity: The validity of the tickets is limited in time and frequency of use and in a bar code
2. Without management software: Commissioning in minutes using barcode control cards instead of software.
3. Autonomous: No need for a computer network. No software. Only power supply.
4. Contactless: Scan 2D codes on tickets and cards without having to open your car door.

Scan&Go Pro is the advanced range in access control for vehicles and pedestrians . Scan&Go Pro offers plug&play properties , but with more features than Scan&Go Basic :

1. Manage temporary and regular users
2. 1D & 2D barcode tickets and cards, RFID, LPM, NFC...
3. Shared parking lots and buildings, multi-site, multi-access, ...
4. Accessible remotely via a cloud-hosted web application
5. Send barcodes via email and scan your smartphone

What does Scan&Go Pro mean?

The Scan & Go Pro range includes modular products that enable access control and revenue collection for vehicle and pedestrian access to the site.

From temporary to permanent

Manage all types of users with Scan&Go Pro. Create and assign specific access rights for longer or shorter periods.

Access control - payment management

Create access rights schedules for regular users.

Distinguish between planned and unexpected visitors.

Equip parking and/or pedestrian access points with a means of payment in order to make them profitable even if they have low traffic.

Multi access – Multi sites – Multi companies

Install an unlimited number of columns and enclosures on one or more sites, regardless of whether the parking lot or building is shared or not.

With ProConnect, each tenant will be able to adjust their own configuration and request reports, even if the hardware is shared.

From vehicles to pedestrians

Expand the parking facility with pedestrian access control and vice versa so that the same type of identifier can be used everywhere

From barcode to LPM

Choice of one or more identification technologies that match the user type. For example, scheduled visitors and staff can default to license plate recognition with a barcode or RFID card as a redundant identifier.

From standalone to online version

The access and payment columns can operate completely autonomously, but can be accessed via the cloud.

Plug & play payment solutions for vehicles and pedestrians, all compatible with Scan&Go Pro columns and entry and exit boxes. Payment of a fixed amount or a variable rate depending on the length of stay, with coins and/or notes and/or bank cards.

Configured as pay-on-foot or payment in vehicle (connected to an automatic barrier, a turnstile, a tripod, etc.), Scan&Go payment terminals operate both autonomously (electric current is sufficient) or in a network.

Each of the products has been designed with the end customer as well as the installer/distributor in mind.

The result is a range of payment solutions with unprecedented plug & play features. Installation and commissioning are done in record time!!

1. Off-street payment terminals and cash registers
2. Pedestrian and vehicle applications
3. Coins, notes, bank cards, smartphone
4. International payment platform
5. Preconfigured terminals, plug&play
6. Installation and commissioning in record time
7. Integrated RFID reader and VOIP intercom

Freestanding columns

Our “Pay-On-Foot” columns are available in five configurations thanks to combinations of three payment methods: coins, notes and bank cards. These columns are available in two widths and two heights in order to have even a PMR variant.

Payment in vehicle

These columns are technically identical to Pay-on-Foot columns. However, additional software features and an adjusted height (thanks to a modular concept) allow these columns to have the proper configuration for an inlet or outlet

Manual cash register​

The manual cash register (APD) consists of a dual-screen tablet connected via Bluetooth to a scanner and a counter printer. The APD can operate stand-alone or in a network and is compatible with ProConnect. Application of fixed or variable parking rates. Agreement of discounts.

Configure APD in network mode (“one ticket” system) or in standalone mode (“two tickets” system).

The Ramp Management System Kit is an intelligent access control solution for traffic ramps, allowing efficient management of vehicle priority.

• 1 alternating management automation for single-track ramp
• 2 traffic lights
• 2 Vehicle detectors with cable for inductive loops on either side of the passage

Operating principle​ (System used for the management of narrow and two-way traffic ramps)

The PLC management controller is connected to a vehicle detection system at the end of the ramp (1 at the entrance and 1 at the exit).

• In first come, first served vehicle mode:

The first vehicle passing the detection system will get priority and will have a green traffic light and for the other end the vehicle will have a red traffic light.

• In vehicle mode in priority output:

The outgoing vehicle will always have priority (green on the traffic light) and the other incoming car will have a red traffic light.

The vehicle sensors are usually inductive loops installed in the roadway.

The DC5 and DC8 displays are “all-in-one” displays. They integrate a counter

differential allowing the counting of the number of parking spaces in a

parking.

OPERATING MODE

The meter is connected to the inductive loop detectors installed at the entrance and the exit from the parking lot

CONFIGURATION

• 5-digit display “DC5”

The DC4 allows the display of the number of free places in green and FULL in red

• 8-digit display “DC8”

The DC8 allows the display of the number of free places in green and FULL in red

DIMENSION

• 5-digit display “DC5”

• 8-digit display “DC8”

The parking space counting for the structure is done from ultrasonic sensors placed above each parking space. They are connected to panels displaying the number of free spaces. With management software, the operator can monitor occupancy and mobility within the parking lot in real time.

1 camera manages 100 parking spaces: 4K AI Recognition rate >98% 1/1.8” sensor IP67 and IK10 Third-party system compatibility Smart IR II 65m IR distance 3.6~10mm motorized lens

AI-based parking spot detection

Integrated with AI deep learning algorithms, Milesight AI outdoor parking management camera can detect and manage up to 100 parking spaces with a detection accuracy of over 98%, greatly facilitating parking guidance and achieving more efficient and intelligent parking management.

Exceptional stage adaptability

Designed for 24/7 outdoor surveillance, Milesight integrates a series of cutting-edge image processing technologies into the AI outdoor parking management camera to realize exceptional scene adaptability. A larger monitoring area is possible thanks to the wide FoV of the motorized zoom lens, and every detail is clearly visible thanks to the 4K ultra-high resolution. In addition, with the 1/1.8″ STARVIS light sensor and image-based frame accumulation technology, it ensures safe and sound outdoor surveillance even at night.

High compatibility

To maximize usability and compatibility, Milesight AI Outdoor Parking Management Camera supports CGI/API, facilitating open integration with third-party platforms. Network protocols, such as HTTP(s), provide a wide range of options for data processing. Transmitting parking information to third-party parking systems helps form a comprehensive solution to quickly guide drivers to parking spaces and enable intelligent management.

Flexible configuration

The parking detection configuration is very flexible and convenient. The area name, area planning space, distribution and numbering scheme of the detection zones are all customizable, providing a simple way to configure the detection zones according to the user's preferences. And the red overlay of occupied parking spaces provides a more intuitive interface.

Motorized zoom lens

Equipped with a motorized zoom and focus lens, the AI Outdoor Parking Management Pro Bullet Plus camera allows remote control of focal length, iris and focus through the use of a lens controller, which is perfect for long-distance surveillance in areas such as parking lots, highways and ports.

Super WDR 120dB

Milesight's sensor-based WDR technology allows the camera to record greater scene details with faithful color reproduction, even in extreme backlight and high contrast conditions. The ratio between the brightest light signal values and the darkest light signal values can be as high as 120 dB.

IP67 and IK10

The AI Outdoor Parking Management Pro Bullet Plus camera features industry-leading IP67 weatherproofing and IK10 vandal-proofing, which help protect the camera from impact to ensure robust performance.

Smart and robust for the LPM solution

2MP · AI LPM · 140dB Super WDR · 0.005Lux Ultra Low-light

IP67 · IK10 · Smart IR II · PoE

Easy and flexible deployment

With built-in LPM AI algorithms and integrated blacklists and allowed lists, Milesight Entry & Exit AI LPM cameras enable a standalone license plate recognition solution for quick implementation scenarios such as gates or barriers with high efficiency and accuracy. It can also be used with Milesight’s own solutions, including Milesight NVR, CMS and Milesight VMS Enterprise, to form a fully closed-loop traffic solution. This highly integrated system ensures a seamless experience for entry and exit access control operations.

Black and white list and detection of vehicles without plates

With the built-in AI LPM algorithm and built-in blacklists and allowed lists, Milesight Entry & Exit AI LPM cameras enable autonomous solutions for license plate recognition and unlicensed vehicle detection. The alarm is triggered as soon as the license plate that complies with the corresponding rule is detected, enabling efficient and accurate access control at any gate, such as a campus or apartment.

LPM Smart Search

With Milesight LPM Smart Search, relevant videos can be found quickly by searching only part of the target suspect vehicle characteristics, such as vehicle type and color, plate color, plate number, speed, direction, etc., ensuring efficient event investigation and intelligent road traffic monitoring. In addition, it supports manual export and automatic export for easy management by security operators.

AI-powered LPM algorithm

Based on AI algorithm, LPM function provides value-added data through pre-trained deep learning model and automatic continuous algorithm training, which can not only recognize vehicle plates in real time with high accuracy, but also identify more vehicle characteristics, such as vehicle type, color, etc., generating powerful safety and traffic information.

Super WDR 140dB

Milesight's sensor-based WDR technology allows the camera to record greater scene details with faithful color reproduction, even in extreme backlight and high contrast conditions. The ratio between the brightest light signal values and the darkest light signal values can be as high as 140 dB.

Motorized zoom lens

Equipped with a motorized zoom and focus lens, the Milesight Entry & Exit AI LPM Pro Dome Camera allows remote control of focal length, iris and focus through the use of a lens controller, making it perfect for long-distance surveillance in areas such as parking lots, highways and ports.

Intelligent and robust for the LPM solution: 2MP · AI LPM · 0.005Lux Ultra Low-light · 140dB Super WDR · IP67 · IK10 · Smart IR II · 60fps

Easy and flexible deployment

With built-in LPM AI algorithms and integrated blacklists and allowed lists, Milesight Entry & Exit AI LPM cameras enable a standalone license plate recognition solution for rapid implementation scenarios such as gates or barriers with a high efficiency and accuracy. It can also be used with Milesight's own solutions, including Milesight NVR, CMS and Milesight VMS Enterprise, to form a fully closed-loop traffic solution. This highly integrated system ensures a seamless experience for operations access control to entrances and exits.

Black and white list and detection of vehicles without plates

With the built-in LPM AI algorithm and integrated blacklists and allowed lists, Milesight Entry & Exit AI LPM cameras enable autonomous solutions for license plate recognition as well as detection of vehicles without plates. The alarm is triggered as soon as the license plate conforming to the corresponding rule is detected, allowing efficient and precise access control to any door, such as a campus or an apartment

LPM Smart Search

With Milesight LPM Smart Search, relevant videos can be found quickly by searching for only a portion of the target suspect vehicle's characteristics, such as vehicle type and color, plate color, plate number, speed, management, etc., ensuring effective event investigation and intelligent monitoring of road traffic. In addition, it supports manual export and automatic export for easy management by security operators.

AI-powered LPM algorithm

Based on AI algorithm, LPM function provides value-added data through pre-trained deep learning model and automatic algorithm continuous training, which can not only recognize vehicle plates in real time with high accuracy, but also identify more vehicle characteristics, such as vehicle type, color, etc., generating powerful safety and traffic information.

Super WDR 140dB

Milesight's sensor-based WDR technology allows the camera to record greater scene details with faithful color reproduction, even in extreme backlight and high contrast conditions. The ratio between the values of The brightest light signal and the darkest light signal values can reach 140 dB.

Advanced Motorized Lens

With a flexible motorized lens (2.7~13.5mm), the camera is able to capture distant subjects rather than fixating on the specific scene without any flexibility. The ultra-wide-angle lens provides a wide field of broader vision to broaden horizons, leaving behind the experiences of narrow vision.

2MP AI LPM Supplementary light Wiegand interface 140dB Super WDR 0.005Lux Ultra Low-light IP67 Smart IR II Illumination distance up to 20m PoE

Easy and flexible deployment

With built-in LPM AI algorithms and integrated blacklists and allowed lists, Milesight Entry & Exit AI LPM cameras enable a standalone license plate recognition solution for quick implementation scenarios such as gates or barriers with high efficiency and accuracy. It can also be used with Milesight’s own solutions, including Milesight NVR, CMS and Milesight VMS Enterprise, to form a fully closed-loop traffic solution. This highly integrated system ensures a seamless experience for entry and exit access control operations.

Extended Compatibility

To maximize usability and compatibility, Milesight Entry & Exit Supplement Light IA LPM camera also supports Wiegand protocol and RS485 interface, allowing open and easy integration with VMS or third-party platforms, realizing solutions such as traffic management, toll collection and access control.

LPM Smart Search

With Milesight LPM Smart Search, relevant videos can be found quickly by searching only part of the target suspect vehicle characteristics, such as vehicle type and color, plate color, plate number, speed, direction, etc., ensuring efficient event investigation and intelligent road traffic monitoring. In addition, it supports manual export and automatic export for easy management by security operators.

AI-powered LPM algorithm

Based on AI algorithm, LPM function provides value-added data through pre-trained deep learning model and automatic continuous algorithm training, which can not only recognize vehicle plates in real time with high accuracy, but also identify more vehicle characteristics, such as vehicle type, color, etc., generating powerful safety and traffic information.

Integrated additional light

Integrated with IR LED supplementary light or white LED light with a Max. 20m illumination distance, Milesight Entry & Exit Supplement Light IA LPM Pro Bullet Plus Camera can not only turn on and off the supplementary light, but also automatically change the brightness of the supplementary light, which achieves flexible monitoring control.

Motorized zoom lens

Equipped with a motorized zoom and focus lens, the Milesight Entry & Exit AI LPM Pro Dome Camera allows remote control of focal length, iris and focus through the use of a lens controller, making it perfect for long-distance surveillance in areas such as parking lots, highways and ports.